- Home
- MIDO/KS-509
MIDO/KS-509
automatic winding
Multifort
Sector dial / FB case
1950s
Case diameter (excluding crown): 21.6mm
Lug width: 10mm
*Overhaul will be performed after ordering.
As a guide, it will take approximately 1 to 1.5 months to complete the overhaul.
If a machine malfunction is discovered during overhaul, we will replace the parts or arrange for replacement parts.
It may take longer than planned. In rare cases, we may be unable to find the defective part and issue a refund.
*We provide a free warranty for 6 months from the date of product shipment.
<Case where you will be charged a fee even during the free warranty period>
・Wear and damage to belts including bracelets and straps
・Wear and damage to exterior parts such as the windshield, case, dial, hands, etc.
Wear and damage to internal parts such as crown, tube, core, etc.
・Failure due to falling or getting wet/submerged
・Loss and theft
・If the quality is determined by our affiliated repair craftsman, or if there are no mechanical or visual problems.
・If used by someone other than the purchaser
・Failure due to excessive winding or pulling of the crown
・If the back cover is opened or repaired by a customer or another store
*About payment methods
Cash on delivery is not an option, so please use other payment methods.
Even if you purchase products other than antique watches in the same order, cash on delivery is not available.
We apologize for any inconvenience this may cause and appreciate your understanding.
Related products
自動巻き / multifort 17石 / 中三針 アラビア全数字ダイヤル 1950s 生産国 : スイス ケース径 (竜頭含まない) : 28.2mm ラグ幅 :15.8mm ※ご注文後にオーバーホールを行います。 オーバーホール完了までは、目安で約1ヶ月~1.5ヶ月ほどです。 オーバーホール時に機械の不具合等が発見された場合、代替部品の交換作業やパーツの手配等を行いますので 予定よりも長く時間がかかる場合もございます。稀に不具合箇所の部品が見つからずご返金対応とさせて頂く場合もございます。 ※商品発送日より6ヶ月間無償保証致します。 <無償保証期間でも有償でのご対応となるケース> ・ブレスレット・ストラップを含むベルトの消耗及び破損 ・風防・ケース・文字盤・針などの外装パーツの消耗及び破損 リューズ・チューブ・巻芯など内部パーツの消耗及び破損 ・落下や水濡れ・水没による故障 ・紛失 及び 盗難 ・弊店提携の修理職人が判断した品質、または機械上および視覚的に問題が無い場合 ・ご購入者様以外の方が使用された場合 ・リューズの巻き上げ過ぎ・引き過ぎによる故障 ・お客様や他店で裏蓋を開けられたり修理された場合
自動巻き / multifortcal.8173段ステップベゼルローマ飛び数字ダイヤル1950sスイス製ケース径 (竜頭含まない) : 29.4mmラグ幅 :16.2mm※ご注文後にオーバーホールを行います。オーバーホール完了までは、目安で約1ヶ月~1.5ヶ月ほどです。オーバーホール時に機械の不具合等が発見された場合、代替部品の交換作業やパーツの手配等を行いますので予定よりも長く時間がかかる場合もございます。稀に不具合箇所の部品が見つからずご返金対応とさせて頂く場合もございます。※商品発送日より6ヶ月間無償保証致します。<無償保証期間でも有償でのご対応となるケース>・ブレスレット・ストラップを含むベルトの消耗及び破損・風防・ケース・文字盤・針などの外装パーツの消耗及び破損リューズ・チューブ・巻芯など内部パーツの消耗及び破損 ・落下や水濡れ・水没による故障・紛失 及び 盗難・弊店提携の修理職人が判断した品質、または機械上および視覚的に問題が無い場合・ご購入者様以外の方が使用された場合・リューズの巻き上げ過ぎ・引き過ぎによる故障・お客様や他店で裏蓋を開けられたり修理された場合※お支払い方法について代金引換はお選び頂けませんので、その他の決済方法をご利用下さい。同注文にて古拙時計以外の商品を一緒にお買い上げ頂く場合も、代金引換はお選び頂けません。ご不便お掛け致しますが、何卒よろしくお願い致します。
automatic / multifort cal.917P Middle three needles 1950s Case diameter (excluding crown): 33.4mm Lug width: 15.9mm *Overhaul will be performed after ordering. As a guide, it will take approximately 1 to 1.5 months to complete the overhaul. If a machine...
automatic winding Multifort extra Three needles in the middle / all numbers 1950s Case diameter (excluding crown): 30.6mm Lug width: 16.1mm *Overhaul will be performed after ordering. As a guide, it will take approximately 1 to 1.5 months to complete...
automatic winding Multifort extra 1940s Case diameter (excluding crown): 28,1mm Lug width: 16mm *Overhaul will be performed after ordering. As a guide, it will take approximately 1 to 1.5 months to complete the overhaul. If a machine malfunction is discovered...
automatic winding Multifort smallsecond / all numbers 1950s Case diameter (excluding crown): 28.2mm Lug width: 16.1mm *Overhaul will be performed after ordering. As a guide, it will take approximately 1 to 1.5 months to complete the overhaul. If a machine...